content top

Lighting Tips for Interior Residential Spaces

The lighting in your home will determine the ambience, mood and even the functionality of the interior spaces. It is important to make the right choices when installing fixtures to avoid inappropriate brightness, dimness or general unsuitability. In simple terms, every section of a residential building requires varying lighting to fulfil different needs. Here is a short guide to help you improve the lighting in each room. Kitchen The kitchen is a busy environment with high human traffic; therefore, you should install bright lighting fixtures. Choose overhead bulbs and lamps for ambience and task lighting. You can set up recessed light for a contemporary sleek look in the room. These are designed to fit into the walls or ceiling so they will not affect the interior architecture significantly. If you prefer a less modern look, consider installing pendant lights. They hang from the ceiling by a stem cable which supports the light; this choice will give the kitchen a more traditional appearance. In addition, you should plan for under-the-counter lighting to prevent bumping of toes in the darkness. You can even engage an electrician to connect these with motion sensors. Bedroom The bedroom needs to be cosy, warm and welcoming; therefore, bright lights should never be in the space. They will not create a comfortable environment for rest and relaxation. Basically, the chosen lamps should be for ambience as opposed to task lighting. Install low wattage bulbs under lampshades and place them on the nightstands for soft and soothing lighting. If you like reading in bed, you can add another larger and brighter fixture, but this should be used sparingly. Bathroom The bathroom can be a hazardous place, so it is critical to ensure that there is sufficient lighting. If you have a small bathroom, overhead lighting over the mirror or in the ceiling is often adequate. The light should be bright to ensure proper visibility. On the other hand, it is vital to note that this lighting is very uncomfortable in the morning. Consider installing a dimmer to regulate the lights according to the immediate requirements. If you have created separate sections for the sink area and the bath or shower, you will need separate lighting. The sink area can utilise recessed overhead lighting, and you can install regular lambs or heat lamps in the bath or shower. The lighting plan for other areas should be simple. The dining room should be bright with central fixtures, while hallways should have adequate lighting with accessible switches at both ends. As you work to update your lighting, work with an experienced electrician you can safely complete any installations that may be...

Read More

Categorization Of Electricians And Factors To Consider When Choosing One

An electrician is a technician whose job entails fitting and repairing electrical circuits, components, and wiring in people’s homes, commercial property, and industrial installations. Apart from fitting and repair work, electricians install and maintain electrical equipment, and electrical instruments. The title of ‘electrician’ is a generally used to refer to the personnel commonly called upon to repair faulty electrical equipment, but it has a wider meaning. Electricians fall into many categories based on the type of work they do and their level of training. Categorization of electricians Installation electricians – These electricians install electrical systems and equipment in all types of buildings. Installation electricians deal with power systems, security systems, as well as fire and lightning electrical surge and spike protection systems. Electro-technical panel technicians – These electricians focus on the installation of control panels that measure and monitor the electricity consumption of all power users in the building. Their jobs usually correspond with the construction or restoration of the building on which the control panel works. Maintenance electricians – This category of electricians check that existing electrical systems and components are in good working order and operating in a safe manner. If need be, they have the skills and equipment necessary to intervene and make sure the systems and components work properly. Machine repair and rewind technicians – These electricians repair specialised electrical components that incorporate extensive cabling and wiring. Such electrical components include transformers, generators, and electric motors. Highway systems technicians -These electricians focus on electrical systems that guide and control motor vehicles and pedestrians on the highway. Their area of expertise revolves around traffic lights, highway lighting systems, electrical signage, and electrical pedestrian control equipment. When electrical systems and components fail, electricians and other trained personnel are called to repair them. However, choosing an electrician is a sensitive affair based on the risks associated with shoddy electrical repair jobs. Some of the factors to consider when choosing an electrician include: Recommendations – An electrician’s referrals and recommendations based on their history and quality of work is the best vetting tool in choosing one. Based on the technician’s referrals, their ability to provide excellent services can be determined. Experience – The second factor that influences the choice of an electrician is their experience. A highly experienced electrician is far better than one with lesser experience since more experience means a better job. Professionalism – Electricians called upon to offer repair or maintenance services must act in a professional manner. Electricians who act professionally provide high quality service since they put critical factors such as safety and system efficiency into consideration. For more information on electricians, go to a site...

Read More

Electrical Problems That Shouldn’t Be Ignored

Some electrical problems in your home can wait until you can make an appointment with an electrician, but there are some electrical issues that may warrant a call to an emergency electrician. Ignoring these problems can mean allowing more damage to be done to the home and, in some cases, increasing your risk of electrical fire. Note a few electrical problems that shouldn’t be ignored and why it’s so vital that you have them addressed as quickly as possible. 1. When you think you smell electricity Since electricity doesn’t have a smell, you might be noticing the odor of bare or frayed wires coming into contact with building materials of the home. This singeing may have a very distinct odor because of the electricity; ignoring this smell can mean allowing the materials to continue to be singed and damaged, and also the risk of an electrical fire.  2. When water and electricity are getting close If your home has exposed wires that have perhaps been chewed through by rodents or suffered other damage, this is a dangerous enough fix on your own. However, if those wires are near a water leak, or you notice a water leak around any frayed or exposed wires, you want to call an emergency electrician. Since water is such a good conductor of electricity, you don’t want to go near the water itself, even if it’s far from the wiring.  Always leave this job to professionals, and never put off having it taken care of immediately so you avoid the risk of shock and injury. 3. When you notice popping or sparks near outlets When you pull out plugs from the electrical outlets in your home, they should never pop or spark. This typically signals a surge of electricity that is popping as you disconnect the cord. If you notice this happening, and especially if you notice popping and sparking even when there is no cord or connection in the outlet, you want to call an emergency electrician. This exposed electricity and sparking can cause singeing of the building materials as mentioned above, so it shouldn’t remain unchecked. 4. When a circuit keeps shutting off If you turn on an electrical appliance or other device and the circuit shuts off, and you turn the circuit back on and it turns off again, you want to call an emergency electrician. This signals that the wiring is overloaded, and in turn, this might lead to an electrical fire. Don’t use the electrical device, and don’t put off calling an electrician, as you want to ensure all your wiring is able to handle the demands put on them. If you notice any...

Read More

Home Automation Services Provided By Residential Electrical Contractors

When you’ve decided that you want to automate your home, you will need a contractor to make the necessary residential electrical installations. Home automation has become increasingly popular as busy people seek ways to ensure that they can control vital home systems when they’re away from the house. Before you make your decision, here are some of the services that residential electrical contractors can offer you for home automation. Lighting — Electrical contractors can wire your lighting system so that your lights dim at a prescribed time or your lights automatically adjust depending on the outside light. For example, an automated light fixture can glow brighter when it senses that the weather is cloudy outside or dim if there is more available light during the night, which can save you money on your energy bill. In addition, electrical contractors can provide you with a remote that controls the entire lighting system so that you can turn off lights from the comfort of your bed. They can also set up a lighting system controllable from your smartphone or tablet so that you can shut off lights when you’re not home or turn them on at night before you arrive. Energy Monitoring — Electrical contractors can also install sensors in your home that track your energy use for the day, month or year. This automated system also tells you which areas of your home are consuming the most energy so that you can determine ways to reduce power output for those areas. For example, if you have a pool, the energy monitoring system can tell you at what hours your pool is using the most power so you can adjust components such as the pool pump to operate during off-peak hours. Electrical contractors can sync your monitoring system so that it works with your smartphone and tablet. Security System — Many people have house alarms and cameras for security. Electrical contractors can automate these systems so that you can arm your security when you’re not at home and even ‘spy’ on your house through security cameras that can be viewed on a smartphone, laptop or tablet. Electrical contractors can also integrate your smart home security automation with your gas range or air conditioning, so that you can turn off or turn on the air from a remote site or even shut off an electric oven or range if you accidentally left it...

Read More

When to Call a Specialist Electrician

Most electricians can handle a variety of jobs that need to be done in the home, from installing your new entertainment center components to rewiring circuits before installing new appliances. However, there may be times when you want to call a specialist electrician, or one who can handle more complex electrical jobs around the home. If you’re not sure of when such a specialist would be needed, note a few jobs that may be out of the expertise of most electricians and why you should call someone experienced with this work in particular. 1. Upgrading very old wiring in the entire home When it’s time to upgrade wiring in the entire home, an electrician may encounter problems that are outside his or her realm of expertise. For instance, older wiring may have been installed behind insulation and it’s now attached to the insulation, which needs to be removed along with the wiring. A new circuit box may also need to be installed. These parts of the work may not be commonly handled by an electrician but a specialist will know how to remove insulation without damaging other building materials and then also put it back into place once the home is rewired, and install a new circuit box as well. 2. Installing new heaters Specialty heaters may call for a specialty electrician. This can mean toe kick heaters, which are installed along the baseboard, or in-wall heaters, which may be installed at any height on the wall. These may be connected to your home’s standard ductwork and the home’s furnace, or they may be separate units that are installed just in one room. These may need specialty wiring on their own circuits or an entirely new circuit in the home. 3. Landscape or outdoor lighting Installing outdoor lighting is a bit different than installing wiring in the home, as this wiring needs to be protected from the elements as well as from potential damage done by rodents and other pests. While the wiring should be out of sight, it also needs to be accessible in case of needed repairs. A specialist electrician should be called as he or she will be experienced in choosing wiring that will be safe from damage and will also know how to install it so that it’s properly buried and protected. This is especially important if your outdoor feature includes water of any sort such as a fountain or waterfall, as the wiring also needs be safe from exposure to this moisture. Only someone experienced with this type of work should be used for such an...

Read More

Things You Can Expect From An Emergency Electrician

Emergency electricians operate 24 hours a day, 7 days a week to take care of urgent situations that require immediate attention. If you’ve never had the occasion to call an electrician, but you have a situation that you believe may call for their services, here are some of the services these professionals can offer you. Wiring Issues — One of the most pressing electrical problems you may experience is when the wiring in your home or flat malfunctions and shorts out your entire electrical system. Emergency electricians are trained to respond to these types of situations, which are typically the result of wiring that wasn’t properly installed, fuses that have blown out or circuit breaker boxes that have overloaded and need to be replaced. In some instances, a combination of these factors has coalesced like a perfect storm and requires intensive electrical work to restore normal function. A/C Breakdown — If your air conditioning breaks down during a hot summer day, you will need to call in an emergency electrician to analyse and diagnose the issue. In some cases, air is still blowing, but it’s blowing warm even though the thermostat is set for cooling, which may indicate a bad condenser with a motor that’s tripped out. In some instances, an emergency electrician has to replace a faulty thermostat, typically because the compressor has shorted out. When your A/C is blowing warm, one of the common reasons is that the condenser has run out of refrigerant, which cools the warm air that comes into your home. Lighting Issues — Another service emergency electricians can provide is to fix any flickering lights that you might have at your home or office. Flickering lights may seem like just a nuisance, but they are often a sign that your lighting wiring is faltering and that can lead to a total short, a blackout or even an electrical fire. Emergency electricians commonly diagnose stripped wires as the main cause of flickering lights and must replace those wires to fix the problem. Keypad Control Malfunctions — If you own a business in which you have installed an access control system, you may have to call an emergency electrician if the system stops working and won’t allow you to enter or exit the premises. Access control systems are installed by trained electrical contractors who specialise in commercial services, and they are able to reset your system. In many instances, the magnetic card reader or code keypad has gone offline or malfunctioned, which causes the entire access control system to seize. Emergency electricians can either reprogram the reader sensor or keypad or replace them with new ones to restore...

Read More
Page 3 of 41234
content top
Menu